MIDORI® Construction power distributor 2x 16A / 5P, 4x 230V wired

Product information "MIDORI® Construction power distributor 2x 16A / 5P, 4x 230V wired".

High quality Midori construction power distributor

Whether outdoors or indoors, on the construction site, in the garage or in the workshop everywhere a lot of power is needed and usually the appropriate sockets are missing. With our high-quality construction power distributor you always have the right connection ready to connect your devices. You can easily attach the distributor to any wall and thus lay the appropriate connections. From the 230 V socket, with which all household appliances are operated, to the 16A heavy current socket, everything you need is included. Thanks to the high-quality workmanship, nothing stands in the way of outdoor use.

Absolutely robust thanks to ABS material

We would like to provide you with a construction power distributor that will support you in all your construction projects in the best possible way, withstand all conditions, is robustly processed and provides you with the best possible power. So that we can keep this, we manufacture our wall-mounted distributors from robust and durable ABS material. ABS (Acrylonitrile Butadiene Styrene) material is often used for the production of enclosures for electronic installations because the material properties are ideal for the purpose. Thanks to the material structure, the enclosure of our power distributor is resistant to the electronic charge that may be generated inside the enclosure. The toughness and rigidity of the material ensure that the distributor is resistant to grease and oil, dirt and moisture repellent and resistant to temperature fluctuations. This makes the construction power distributor ideal for outdoor use. So that you can be absolutely sure, the distributor is equipped with the IP44 degree of protection. This gives you the certainty that our high-quality construction power distributor is protected against the penetration of foreign bodies that have a minimum size of 1 mm and against splash water.

Everything in view, thanks to PC protection flap

You want to have your fuses always well in view without having to open the protective cover every time? Then you have made the right choice with our construction power distributor. We manufacture the protective cover for the fuses from high quality PC material. The polycarbonate is a thermal plastic that combines high transparency with very good impact strength and heat resistance. These properties make it perfect to use for our distributor. In addition, thanks to its use, the protective flap has good electrical insulation properties. Resistance to grease, oil and dilute acids is also not insignificant when used on the construction site or in the garage. Here, too, we have the IP44 protection class with the protection against splashing water and foreign bodies. Another great advantage comes with our power distribution boxes. Should you ever open the protective flap to be able to operate the fuses behind it, you do not have to keep the flap open all the time. The practical latching function in the uppermost position reliably keeps the flap open and gives you unhindered access.

Many 230 V connections for a good workflow

Everyone knows it and it is always exasperating. You need several devices to be able to work and constantly all the sockets are occupied or even worse in the place where you want to work there are no sockets at all. So that this never happens to you again, we supply you with a power distributor that provides you with many sockets for all household appliances. With 4 sockets on the distributor you can connect several devices at the same time. The 230 V sockets provide sufficient current and are protected by 16 amperes. The 4 sockets, each with 1 phase, are well protected against overvoltage thanks to the 16 A. However, if an overvoltage should occur, the fuse will quickly fly out to protect you from damage. Please always check before the start-up of your devices for which continuous loads the electrical installation is designed to avoid an overload with strong heat development. The maximum power of our 230 V socket will also help you here. To determine the power, you must multiply the voltage (volts) by the current (amperes). This means in the case of our 230 V sockets, a maximum power of 3.68 kW or in other words 3,680 watts.

16 A power sockets for more safety

With a CEE 16 A power socket, many industrial machines can be operated safely and stably. Especially on construction sites or workshops the 16 A sockets are needed because of the more stable power. At our construction power distributor you will find two pieces of these sockets to connect all devices that require a higher power. In addition, the CEE sockets with 16 Amper are designed for continuous operation. Industrial current, three-phase current, 3-phase alternating current or also known as heavy current is used for this purpose. To use this current, you need a CEE 16 A, 5 pole power cable that gives you a maximum power of 11 kW due to its construction. How this power comes about is explained quite simply. A CEE 16 A plug consists of 3 phases, the so-called outer conductors, a neutral conductor and an earth. Between one phase and the neutral conductor there is a voltage of 230 V AC. This socket is also fused with 16 A. This means that a 400-volt device can deliver about twice as much power with the same consumption. The sockets on our construction power distributor must also meet a certain degree of protection to provide you with the necessary safety. For this reason, we have installed self-closing flaps on the sockets, which meet the IP44 degree of protection and thus do not allow splashing water or foreign bodies to penetrate.

High quality Schneider fuses Made in Germany

Not only do we supply you with a high-quality housing, but we also rely on absolutely safe and high-quality fuses. Only fuses made by Schneider can be considered for our construction power distribution boards. The company Schneider is a German family business with a long company history and thus many years of experience. In order to provide the best possible protection for our power distributors, we use 16 A fuses for the 230 V sockets. The 1-pole fuses with an insulation voltage of 500 V and a surge voltage resistance of 4000 V offer you the best protection. Also the power sockets with 16 A are protected by a 16 A fuse with an insulation voltage of 500 V and a surge voltage strength of 4000 V. This 3-pole fuse from the Schneider company in combination with our high safety standards, robust workmanship and intelligent design, our construction power distribution boxes are the ideal partner for you. Bring voltage into your everyday life and use our high-quality wall-mounted distributors.

Technical data

Manifold dimensions:

• Length: 32.4 cm
• Width: 24,4 cm
• Depth: ~ 16 cm (incl. sockets)
• Overall dimensions (L x W x D): 324 x 244 x 160 mm

Sockets:

• 1 x 16 A / 5P, 400 V, maximum power: 22 kW
• 4 x 230 V, 16 A / 1P, maximum power: 3.68 kW

Fuses:

• Residual current circuit breaker 4 pole 40A/30mA type B Schneider x 1
• circuit breaker 1 pole 6kA C-characteristic 16A 1 module Schneider x 4
• Circuit breaker 3 pole 6kA C-characteristic 16A 3 modules Schneider x 1
• Phase bar 3 pole with fork connection 10mm² 63A 12 modules Schneider x 1

Protection class:

• IP44 (protected against splashing water and foreign bodies with a diameter >1mm).

Material:

• Housing: ABS (Acrylonitrile Butadiene Styrene)
• Protective cover: PC (polycarbonate)

Properties:

• moisture and dirt repellent
• resistant to diluted acids, oils, greases, ethanol
• heat resistant
• resistant to electronic charge
• good electronic insulating properties
• resistant to temperature fluctuations
• impact and scratch resistant

IMPORTANT NOTE: The installation of the construction power distribution board must be carried out by a competent eclectic!!!