MIDORI® Construction power distributor 16A / 5P, 2x 230V wired

Product information "MIDORI® Construction power distributor 16A / 5P, 2x 230V wired".

Construction power distributor from Midori

Whether on the construction site, in the workshop or in the garage, power is constantly needed everywhere. So that you always have the right connection, we have the right construction power distributor for you. Our high-quality wall-mounted distributors can be installed wherever you need them. Connect your electronic devices to one of the two 230 V sockets or charge your new electric car in the garage at the 16 A socket. Thanks to the high-quality workmanship and good protection, our wall distributors can be used optimally both outdoors and indoors.

Robust material for all occasions

You can recognize a high-quality construction power distributor by the materials used and the way they are processed. We would like to supply you with a high-quality construction power distributor that will perform well even on the toughest construction site. Therefore, we make our wall-mounted distribution boxes from high quality ABS material. Acrylonitrile butadiene styrene (ABS) is a stable material that is particularly suitable for electrical installation enclosures. Thanks to the rigidity and toughness of the material, it is resistant to electronic charge. Also temperature fluctuations can not harm the housing so quickly. ABS is resistant to oils, greases and thanks to the material structure it is moisture and dirt repellent. These properties make our wall distributor the ideal power source both indoors and outdoors. In order to ensure your safety, our distribution boards are manufactured according to the IP44 degree of protection. This manufacturing guarantees you that the distributor is protected against the penetration of foreign bodies with a diameter of more than 1 mm and even splash water, which includes rain, have nothing to oppose the construction power distributor.

High-quality protective flap made of polycarbonate

So that you always have everything in view, we have decided to keep the flap transparent to protect the fuses. Here it is important to use a good material to be able to guarantee safety and durability. The most suitable material for this task is PC, or polycarbonate. Polycarbonate is a thermal plastic that combines the best material properties to form a transparent protective flap that has high heat resistance and good impact strength. You will also be convinced by its good electrical insulation properties and resistance to dilute acids, oils and greases, but also ethanol. So that the protective flap also matches our housing, this is also provided with the IP44 degree of protection. Foreign bodies with more than 1 mm size and splash water have no chance to penetrate here. Upgrade your garage or construction site with our high-quality distributor and benefit from any amount of power.

230 V for all household items

Especially in garages or on the construction site, sockets are difficult to find. With our construction power distributor, which you can easily mount on the wall, you always have the right socket ready. The high-quality power distributor offers you 2 strong household sockets with 230 V each. Connect your drill, a construction spotlight for more light or even the kettle to our construction power distributor. The 230 V sockets have 1 phase and are fused with 16 Amper. Thus, in the event of a surge, it is guaranteed that the fuse would pop out and will save you from damage. To avoid this, before each use, check the maximum power of your devices that you want to connect. To determine the power, you need to multiply the voltage (volts) by the amperage (amps). In the case of our 230 V sockets, this means a maximum power of 3.68 kW or in other words 3,680 watts. Please always pay attention to these values to avoid strong heat development and resulting fires.

The power socket with 16 A

If you want to install our high-quality wall-mounted distributor in your garage, you can not only connect large construction equipment to the CEE 16 A socket, but also charge your e-car without any problems. The power outlet is designed for continuous operation of industrial machines that require higher power to be operated. For this purpose, the stable 3-phase alternating current is used, which is also known as three-phase current, industrial current or generally as heavy current. To make the best use of this current, you need the robust and maintenance-free CEE 16 A socket on our power distributor. Here you can connect your 5 pole 16 A plug. This offers you, due to its design, a maximum power of 11,000 watts (11 kW). If you are wondering how this power comes about, it is explained quite simply. A CEE 16 A plug consists of 3 phases, the so-called outer conductors, a neutral conductor and an earth. Between one phase and the neutral conductor there is a voltage of 230 V AC. This socket is also fused with 16 A. This means that a 400-volt device can deliver about twice as much power with the same consumption. The sockets on our construction power distributor must also meet a certain degree of protection to provide you with the necessary safety. For this reason, we have installed self-closing flaps on the sockets, which meet the IP44 degree of protection and thus do not allow splashing water or foreign bodies to penetrate.

Protected by high-quality fuses

Your safety is very important to us. For this reason, we install only the best materials and, of course, high-quality fuses in our construction power distributor. The fuses from Schneider offer the best protection. Schneider is a German company that has been manufacturing fuses for electrical installations since 1955. Many years of experience combined with German accuracy form the basis for your safety. Thus, we protect the 230 V sockets with a 1-pole 16 A fuse each, which has an insulation voltage of 500 V and a surge voltage resistance of 4000 V. The red CEE sockets with 16 A must also be properly fused to prevent serious consequences. The 3-pole Schneider fuse with an insulation voltage of 500 V and a surge voltage strength of 4000 V and 16 Amper is exactly the right fuse for this. Thanks to the high quality of the fuses and our construction power distributor, in conjunction with the high safety requirements and the robust workmanship, you can be sure that all your equipment is well protected. With our wall distributor you are always well equipped.

Technical data

Manifold dimensions:

• Length: 30.0 cm
• Width: 21.0 cm
• Depth: ~ 14 cm (incl. sockets)
• Overall dimensions (L x W x D): 300 x 210 x 140 mm

Sockets:

• 1 x 16 A / 5P, 400 V, maximum power: 22 kW
• 2 x 230 V, 16 A / 1P, maximum power: 3.68 kW

Fuses:

• Residual current circuit breaker 4 pole 40A/30mA type AC Schneider x 1
• circuit breaker 1 pole 6kA C-characteristic 16A 1 module Schneider x 4
• Circuit breaker 3 pole 6kA C-characteristic 16A 3 modules Schneider x 1
• Phase bar 3 pole with fork connection 10mm² 63A 12 modules Schneider x 1

Protection class:

• IP44 (protected against splashing water and foreign bodies with a diameter >1mm).

Material:

• Housing: ABS (Acrylonitrile Butadiene Styrene)
• Protective cover: PC (polycarbonate)

Properties:

• moisture and dirt repellent
• resistant to diluted acids, oils, greases, ethanol
• heat resistant
• resistant to electronic charge
• good electronic insulating properties
• resistant to temperature fluctuations
• impact and scratch resistant

IMPORTANT NOTE: The installation of the construction power distribution board must be carried out by a competent eclectic!!!